Product Details
Place of Origin: Sichuan,China
Brand Name: I-ReHealth
Certification: ISO
Model Number: Pit And Fissure Sealant
Payment & Shipping Terms
Minimum Order Quantity: 50box
Price: Depends on the order quantity
Packaging Details: box 70*54*165mm
Delivery Time: 3-14 work days
Payment Terms: T/T
Supply Ability: 1000box/mouth
Product Name: |
Pit And Fissure Sealant |
Shelf Life: |
3 Years |
Specifications: |
1.5g |
Place: |
China |
Color: |
Pink |
Curing Depth: |
>1.5mm |
Product Name: |
Pit And Fissure Sealant |
Shelf Life: |
3 Years |
Specifications: |
1.5g |
Place: |
China |
Color: |
Pink |
Curing Depth: |
>1.5mm |
White Color Pit And Fissure Sealant For Dental Cavity With 1.2g Packing
【Product name】
pit and fissure sealant
[model]
purple, pink, blue, white
[Specification]
1.2g/bottle, 1.2mL/bottle, 1.5g/bottle, 1.5mL/bottle, 3g/bottle, 3mL/bottle, 5g/bottle, 5mL/bottle
There are two main types of widely used pit and fissure sealants, namely, self-curing type (after coating, within 1-2 minutes, the material will be cured by the action of a catalyst) and visible light-curing type (after being irradiated with light of a certain wavelength). 30 seconds, it can be cured), the anti-caries effect of the two is not much different. The factors affecting the anti-caries effect mainly depend on the retention rate of the pit sealant. The higher the retention rate, the better the anti-caries effect; and the effect on the retention rate of the pit and fissure sealant mainly depends on the operation process. Whether the steps meet the requirements. In particular, thoroughly clean the tooth surface, rinse and dry the tooth after acid etching. It is the most important key to prevent the treated tooth surface from being recontaminated by saliva. Contamination of the treated tooth surface, coupled with the careful operation of medical staff, can be successful.
History
Pit and fissure sealant, also known as anti-caries paint, is a new type of oral medical polymer material developed in the 1960s. Apply it to the pits and fissures of the tooth surface, and form a barrier after curing, which can effectively seal the pits and fissures, and isolate the caries-causing factors in the oral environment from invading the teeth, thereby preventing the occurrence of caries. Its advent has opened up a new approach to prevent dental caries for oral preventive medicine.
Product Information:
| Name |
Pit And Fissure Sealant |
|
Package |
1.5g |
| Color | Pink |
|
Warranty |
3 Years |
| Approved |
ISO |
【Contraindications】
* Those who have a history of allergies to the ingredients in this product are prohibited.
【Instructions】
1. Clean the tooth surface: install a small brush on the low-speed mobile phone, thoroughly clean the pits and grooves on the tooth surface that are to be sealed, and then rinse fully with a water gun. After cleaning the tooth surface, use cotton gauze balls to prevent moisture, dry the tooth surface and keep it dry.
2. Acid etching, rinsing and drying: It is recommended to use phosphoric acid gel with a phosphoric acid content of not less than 35% for acid etching. The etching time of permanent teeth is generally 20-30 seconds, and that of deciduous teeth is 60 seconds. Be careful not to wipe the etched tooth surface during the etching process, because this will damage the etched enamel surface and reduce the bonding force.
3. Apply sealant: Unscrew the sealing cap of the pit and fissure sealant, install a dental flushing needle or a dental delivery head, gently push the push rod of the conveyor, and directly apply the pit and fissure sealant to the pit and fissure. When applying pit and fissure sealant, attention should be paid to the discharge of air bubbles, and the coverage of the sealant should be smaller than that of the acid-etched surface, and it should be as thick as possible without affecting the occlusion. Sometimes it may be high, but it can be worn off after 2-3 days. If the coating is too thin, it will lack sufficient compressive strength and be easily crushed.
Company Profiles:
Chengdu I-ReHealth Medical Devices Co., Ltd is a high-tech R&D and manufacturing company focusing on the oral health field (medical materials and medical devices). Founded in 2016, it is located in the beautiful "Tianfu Kingdom"-Chengdu.
Based on the dental industry, I-ReHealth develops a strategic layout and is committed to providing customers with high-quality oral medical solutions. The company has formed a long-term and in-depth cooperation relationship with the West China Hospital of Stomatology.
FAQ:
1.How can I get the price?
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
